Floor sanding

Floor sanding
Floor sanding takes care of the rough edges on the wood floor of houses in London. Sanding floors requires a drum floor sander, vibrating sander, and an edge sander.

The drum floor sander comprises of the sander, a large dust bag, and a drum to which large sheets of sanding paper are attached. The sandpaper is mounted on a cylindrical drum which rotates on an axis parallel to the plane of the floor. It does all the dirty job when it does away with the undesirable spots and stains off the floor. However, one must be very careful not to use the drum sander with a lot of pressure if one wishes to avoid permanent grooves in the wood. The drum sander might strip off some of the wood!

The vibrating sander steps in to clean the raffish edges on the surface of the wood left over by the application of the wood sander. This is approximately the same size as a drum sander. It comes with an additional dust bag. The vibrating sander comes as an improvement over the drum sander. It is a bit lighter, and easier to move. Moreover, chances of creating raffish edges on the wood are less.

A large orbital sander could be used as an alternative. Both the vibrating sander and the orbital sander take care of putting a smooth polish to the wood surface.

The edge sander is the last tool used in the process of wood floor sanding. This is used for reaching out to places that are difficult to reach over the vibrating or large orbital sander. This is a hand-held tool. It has a dust bag and an orbital motion too. It is, however, heavy and expensive. It has all the power needed to sand down hardwood floor.

At the end of the day, wood floor sanding requires a bit of patience. Sanding wood floors does take some time. After all, Rome was not built in a day.